DJI Store Thailand
DJI Mini 4K
Aerial Photography Made Easy
Easy and intuitive for beginners, DJI Mini 4K supports one-tap takeoff and landing, Return to Home (RTH), stable hovering, and much more.
Under 249 g [1]
With no need to register in most countries and regions, the palm-sized drone easily fits in any bag for effortless carrying and creation.
Stunning Intelligent Features
The equipped 1/2.3-inch CMOS camera delivers crisp 4K video. Multiple intelligent modes allow you to get impressive QuickShots and Panoramas.
10km Video Transmission
DJI O2 video transmission supports up to 10km [2] of HD video transmission and excellent anti-interference capabilities for clear, easy flight.
31-Min Max Flight Time [3]
Mini 4K provides more than enough time to compose the perfect shot.
38kph (Level 5) Wind Resistance
Supporting 38kph (Level 5) wind resistance and 4000m max takeoff altitude, Mini 4K keeps your footage stable in more flight scenarios.
1. The standard aircraft weight (including the Intelligent Flight Battery, propellers, and a microSD card). The actual product weight may vary due to differences in batch materials and external factors. Registration is not required in some countries and regions. Please check local laws and regulations before use.
2. FCC compliant and tested in an open outdoor environment without interference.
3. Flight time is measured in a controlled test environment. Specific test conditions are as follows: flying forward at a constant speed of 17 kph in a windless laboratory environment, in photo mode (without photo taking operation during flight), and from 100% battery level until 0%.
Take a Closer Look
28-Hour Internal Storage [2], 32-bit Float Internal Recording [1]
Preserve a vast dynamic range with 32-bit float internal recording [1], and effortlessly fix clipped audio in post. With approximately 14.5 GB of storage, enjoy up to 28 hours of loop recording [2] as a reliable backup against signal drops. For added flexibility, choose to save internal recordings as the original track or an algorithm-enhanced version [16].
4TX + 1RX Cross-Gen Connectivity [3]
A single receiver pairs up to 4 transmitters simultaneously [3], making it ideal for multi-person content creation. Build a flexible, cost-effective setup by seamlessly mixing and matching Mic Mini, Mini 2, and Mini 2S [3]. The Mini 2S Transmitter also pairs with the Mic Series Mobile Receiver [3].
Four-Channel Output [12], Effortless Editing
Connect the receiver to a Sony camera via the DJI Mic Series Camera Adapter or a 3.5mm cable and unlock Quadraphonic mode [12]. Outputting four independent audio channels [12] gives you greater control for precise track separation and flexible mixing in post-production.Two-Level AI Noise Canceling [5], Three Voice Tone Presets [6]
Powered by DJI's new proprietary noise-canceling model, the two-level AI noise canceling precisely suppresses ambient noise while preserving vocal clarity [5]. Enhance your recordings further with Regular, Rich, or Bright voice tone presets [6].
Lightweight & Versatile, Compact Storage [8]
Weighing just about 12 g, the transmitter easily mounts to your clothing, while multi-color magnetic front covers [9] help you match different styles. The optimized charging case comfortably houses two transmitters, a Mini 2S receiver, a mobile receiver, and core accessories [8] together.
Wide Compatibility for Diverse Scenarios
Connect the Mic Mini 2S Receiver to cameras, phones, computers, and tablets [13], or enjoy plug-and-play ease with the Mobile Receiver. The transmitter links directly to your smartphone via Bluetooth [14] for seamless use with third-party apps [15]. It even stores pairing history for automatic reconnection.
Lasting Battery, Reliable Backup
Enjoy up to 40 hours of battery life [10] with the charging case. Fast charging [11] and power-saving features keep you focused on recording, not waiting. If the receiver battery runs low, the transmitter auto-triggers internal recording, providing a safety net for your audio.
DJI OsmoAudio Direct Connection[4]
The transmitter supports direct connection to select DJI products without a receiver [4], simplifying your gear and workflow.
* The transmitter images on the DJI Mic Mini 2S packaging may vary slightly from the actual product. Please refer to the physical item received. This cosmetic difference does not affect the product's functionality or performance.
1. 32-bit Float Internal Recording is disabled by default and can be enabled via the DJI Mimo app. While 32-bit float recording significantly improves dynamic range, the effective range depends on the microphone's physical characteristics. For detailed specifications, refer to the Specs page on the official DJI Mic Mini 2S website.
2. The DJI Mic Mini 2S Transmitter features approximately 14.5GB built-in storage and can record up to 28 hours of audio in the default 24-bit internal recording mode. In the 32-bit internal recording mode, it can record up to 22 hours of audio.
3. For the 4TX + 1RX setup, transmitters not included in the combo are sold separately. DJI Mic Mini 2S supports mixed connection with DJI Mic Mini and Mic Mini 2. The DJI Mic Mini 2S Receiver can connect to Mic Mini, Mic Mini 2, and Mic Mini 2S transmitters (supporting up to four transmitters). The DJI Mic Mini 2S Transmitter can connect to Mic Mini and Mic Mini 2S receivers, or the DJI Mic Series Mobile Receiver. For details, visit the Downloads page of the DJI Mic Mini 2S website for the DJI Mic Series Mobile Receiver Cross-Model Compatibility List.
4. The DJI Mic Mini 2S Transmitters can directly connect to select DJI products. For details, please visit the Downloads page of the DJI Mic Mini 2S website for the OsmoAudio Compatibility List.
5. The Noise Canceling feature is disabled by default. It can be enabled via the transmitter button or DJI Mimo app, while the noise canceling level (Strong or Basic) can be set via the app. When using the receiver with multiple transmitters, noise canceling can be enabled/disabled for all transmitters simultaneously. When the transmitter is connected to a DJI OsmoAudio ecosystem device, the Noise Canceling feature can be set directly on the device's interface. The noise cancelation switch on the DJI Mic Series Mobile Receiver allows quick adjustment of noise cancelation levels (Off = O, Low = L, High = H). Note that if the internal recording file type is set to Original File, noise canceling will not apply to the internally recorded file but will still affect the audio signal transmitted to the receiver.
6. The Voice Tone Preset modes can be selected via the DJI Mimo app, with the default set to Regular. Note that if the internal recording file type is set to Original File, voice tone presets will not apply to the internally recorded file but will still affect the audio signal transmitted to the receiver.
7. The Adaptive Gain Control feature can be configured via the DJI Mimo app, and it is turned off by default.
8. The DJI Mic Mini 2S Charging Case can store up to: 2 transmitters, 2 magnetic clips, 2 magnetic front covers, 2 magnets, 2 windscreens, 1 DJI Mic Mini 2S Receiver, 1 DJI Mic Series Mobile Receiver, 1 Mic Mini 2S Camera Audio Cable (3.5mm TRS), and 1 Mic Mini Mobile Phone Adapter. To prevent product damage, avoid stacking items in the charging case. Note: The DJI Mic Series Mobile Receiver is not included in the DJI Mic Mini 2S (2 TX + 1 RX + Charging Case) combo and is sold separately.
9. The DJI Mic Mini 2S Multi-Color Magnetic Front Cover Set is not included in certain combos and is sold separately. Obsidian Black and Glaze White magnetic front covers are standard accessories included with the DJI Mic Mini 2S (2 TX + 1 RX + Charging Case) combo, so users do not need to purchase them separately. Please note that all aforementioned magnetic front covers are compatible only with the DJI Mic Mini 2S Transmitter.
10. The approx. 40-hour operating time was measured using DJI Mic Mini 2S (2 TX + 1 RX + Charging Case) paired with a fully charged charging case, with features such as noise cancelation and internal recording off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver and the receiver connected to a camera via the 3.5mm audio cable.
11. Both the transmitter and receiver can provide up to 1 hour of operating time with just a 5-minute charge. This 5-minute charge was measured with the transmitters and receiver battery levels below 25%, using a charger of 5V output. The operating time was measured with noise cancelation off, during close-range audio recording under interference-free conditions, with both transmitters connected to the receiver, and the receiver connected to a camera via the 3.5mm audio cable. Data was collected in a controlled environment and should be taken as reference only.
12. To enable four-channel output, additional accessories must be purchased separately. The four-channel output feature is only supported by certain Sony camera models (requiring the DJI Mic Series Camera Adapter) and certain computer software (via USB output). For details, refer to the compatibility list on the Downloads page of the official DJI Mic Mini 2S website.
13. For a list of compatible devices, refer to the Downloads page on the official DJI Mic Mini 2S website.
14. Only one transmitter can be directly connected and used as the audio input source at a time.
15. When connected directly to a smartphone via Bluetooth, the transmitter does not support audio recording with the phone's native camera app; it only works with third-party apps. For a list of compatible apps, refer to the Downloads page on the DJI Mic Mini 2S official website.
16. Internal recordings can be saved as either Original File or an algorithm-enhanced Edited File. The default setting is the Edited File. To change this format: when the transmitter is directly connected to a compatible smartphone or a DJI OsmoAudio ecosystem device, make the selection via the phone or device interface; when the receiver is connected to a smartphone, configure it via the DJI Mimo app. Algorithm-based enhancements include voice tone presets, low cut, noise cancellation, and adaptive gain control.